- How do I connect my DVD player to my receiver and TV?
- How do you hook up a DVD player to yellow red and white TV?
- How do you hook up a DVD player to a TV that has no yellow input?
- How do I hook up my old DVD player to my new TV?
- How do I hook up my old DVD player to my HDMI TV?
- What cable do I need to connect DVD player to Smart TV?
- Why won’t my DVD player work on my smart TV?
- Why does my TV say no signal when I plug in my DVD player?
- Why is my DVD player not reading the disc?
- What to do if DVD is not reading?
- How do you fix a disc that won’t read?
- What do you do if your DVD won’t play?
- Why is my new DVD not playing?
- How do I get my DVD to work on my TV?
- How do you reset a DVD player?
- How do you know if your DVD player is bad?
- How can I control my DVD player without a remote?
How do I connect my DVD player to my receiver and TV?
Connect one end of the HDMI cable to the DVD connector labeled HDMI, Output, Monitor or TV and the other end to any Input HDMI connector on the Receiver. Connect one end of the HDMI cable to the Receiver connector labeled HDMI, Output, Monitor or TV and the other end to any Input HDMI connector on the TV.
How do you hook up a DVD player to yellow red and white TV?
Plug in one end of the A/V Cables to the Output sockets on the DVD player. The sockets are color-coded to match the cable (Red, White, and Yellow). Look for the “Output” or “Out” group. The Red and White sockets (Audio) may be separated from the Yellow one (Video).
How do you hook up a DVD player to a TV that has no yellow input?
Connect the component video cable (Green, Blue, Red RCA) to the DVD player. Next, connect the White and RED audio RCA cables to the corresponding connectors on the back of the DVD player. Take the other side of the component video cable and audio cables and connect them to your TV.
How do I hook up my old DVD player to my new TV?
Connect one end of the HDMI cable to the composite to HDMI converter and the other end into the back of your TV. Make note of which HDMI input you plug the cable into. Switch inputs on your TV to the HDMI input you just plugged your HDMI cable into. Now your old DVD player should be working fine on your new television!
How do I hook up my old DVD player to my HDMI TV?
Connect one side of an HDMI cable to the back of the DVD player. The other side of the HDMI cable connect it to an available input on your TV. Turn on the DVD player, and using the TV’s remote, select the corresponding input. At this point, you should see the DVD Player logo on your TV screen.
What cable do I need to connect DVD player to Smart TV?
A DVD Player can be connected to a TV using an HDMI, composite, component, or S-Video cable. Check to see what connections your Samsung TV supports before you purchase a DVD or Blu-ray player. You will then need to select the proper source or “input” on your TV to view the DVD player once it’s connected.
Why won’t my DVD player work on my smart TV?
Ensure the video cable between the DVD player and TV is securely connected to both devices. NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches. Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced .
Why does my TV say no signal when I plug in my DVD player?
Change the INPUT or source the HDTV is set to by pressing the INPUT button on the TV or its original remote. When you try different inputs, let the DVD player play a disc and output a constant signal. If your TV has the correct INPUT or Source, unplug the cable and plug it back, or try another cable or port.
Why is my DVD player not reading the disc?
Use a soft cloth to clean the disc ; the disc may have fingerprints or smudges. Examine the disc for any cracks or scratches that might be interfering with playback. Make sure the disc playback is not restricted by parental control options. Make sure the DVD disc is compatible with the player.
What to do if DVD is not reading?
HP PCs – CD/DVD Drive Cannot Read Discs (Windows 10, 8)
- Step 1: Confirm if the disc is causing the issue.
- Step 2: Run the Hardware and Devices troubleshooter.
- Step 3: Test the drive for a hardware failure.
- Step 4: Check the drive status in Device Manager.
- Step 5: Enable AutoPlay.
- Step 6: Restore the PC to an earlier state.
How do you fix a disc that won’t read?
5 Ways to Repair a CD or DVD
- Clean the disc using a soft lint-free cloth and a dab of warm water and mild detergent.
- Fill scratches with toothpaste.
- Soften scratches with heat from a 60W lightbulb.
- Fill the scratch with a wax-based product.
- Cover holes in the data layer with pen and tape.
What do you do if your DVD won’t play?
How to Fix DVD Won’t Play – 7 Solutions
- Solution 1: Check if the DVD type is incompatible with DVD player.
- Solution 2: Clean the dirty DVD or try a different disc.
- Solution 3: Ensure solid connection between DVD player and TV.
- Solution 4: Install Third Party DVD Player Software.
- Solution 5: Update DVD Firmware.
Why is my new DVD not playing?
Playback problems with a DVD typically are caused by one of four factors: The DVD is dirty and smudged; the laser lens in the DVD player’s disc drive needs cleaning; the DVD player no longer is tracking properly; or the disc is scratched.
How do I get my DVD to work on my TV?
To connect your TV to your DVD player, plug the included cables (HDMI and/or composite cable) into both the player and the TV ports. Then, make sure the TV and DVD player are both plugged in and turn them on. Insert a DVD to test it out.
How do you reset a DVD player?
You can reset your DVD player either via a remote control combination button press or via the screen menu (SETUP) return set (reset). Your instruction manual will normally give accurate instructions for resetting the player. Look over the chapeter titled “reset” or “Initialize mode” .
How do you know if your DVD player is bad?
Listen to the machine when you insert the DVD. If you hear noises in the form of a series of clicks and creak-like sounds as the lens and laser both engages and attempt to read the disc, your lens is likely still good, only dirty or otherwise having difficulty reading the disc.
How can I control my DVD player without a remote?
If you can’t find your DVD player or Blu-ray player remote control, or it has stopped working, don’t despair. You can often still play media using buttons on the device itself. You can also use a universal remote or, with some models, a smart phone app to control the player.